Quick Start Guide for Cudy FlashRouters
Find setup guides, FAQs and troubleshooting tips for Cudy configured FlashRouters.
Cudy Router Setup Guide
Search Results for: routers that support wireguard
How do I upgrade the DD-WRT firmware of my FlashRouter?
The following DD-WRT builds are from 11/24/2024 r58699. Keep in mind that these builds are for upgrading routers that already have DD-WRT firmware flashed. To flash a stock firmware router with DD-WRT firmware see our Flash My Router plan!
Download an updated DD-WRT firmware build for your specific FlashRouter model below. Contact support@flashrouters.com if you are uncertain about your router model or your router model is not available below.
- Asus RT-AC5300
- Asus RT-AC56U
- Asus RT-AC66U
- Asus RT-AC68U
- Asus RT-AC87U
- Linksys WRT1200AC
- Linksys WRT1900AC
- Linksys WRT1900ACv2
- Linksys WRT1900ACS
- Linksys WRT1900ACSv2
- Linksys WRT3200ACM
- Linksys WRT32X
- Netgear R6300v2
- Netgear R6400
- Netgear R6400v2
- Netgear R6700
- Netgear R6700v2
- Netgear R6700v3
- Netgear R7000
- Netgear R7000P
- Netgear R7450
- Netgear R7800
- Netgear R8000
- Netgear R8500
- Netgear R9000
Please be aware that FlashRouters is not responsible for any DIY firmware flashing updates. If you have questions or concerns contact FlashRouters Support or check out the DD-WRT Community for additional helpful resources.
Make sure you are following the directions below to load the firmware file into the router settings and not trying to open the firmware file on its own.
Access the FlashRouter via wired connection. It is possible to upgrade firmware via WiFi, but this is not recommended unless you are unable to wire directly to the router.
Navigate to Administration > Firmware Upgrade
- Do NOT select Reset to Default Settings in the dropdown menu as this will erase all of your FlashRouter settings.
NOTE: If you are updating from an older DD-WRT build you may be required to reset the router after a firmware update for new features and UI to properly load. You will then be required to setup the administration username and password along with your WiFi and VPN network settings. - Click Choose File and select the file you have downloaded.
- Click Upgrade.
Shipping FAQs
Shipping FAQs
General Shipping FAQs
What company do you use for shipping?
For domestic shipping, we offer United State Postal Service (USPS), and a FedEx Expedited 2-3 Day delivery option.
For International shipments, we offer USPS and FedEx.
Where do you ship from?
We ship all packages from our New Jersey warehouse.
How much does shipping cost?
Domestic Customers:
- Free Standard Shipping 3-10 day Delivery (Orders $200+)
- $20 Flat Rate FedEx 2-3 Day Express shipping
International Customers:
- Pricing for USPS, and FedEx will vary by country. You can see rates on the Shipping Estimate tab on any FlashRouters product page. FlashRouters does not add any internal handling fees to international rates.
- Note: Customers pay customs, duties, processing fees, and taxes (if applicable).
How fast do you ship?
We aim to ship your purchase within 1-2 business days from the original order date.
There may be a delay of up to 24 hours if our configuration team is unable to configure your router as requested. In these cases, our support team will reach out to you in an attempt to find a solution. If the team does not hear back from you within 24 hours they will ship out the unit to avoid further delays. Keep in mind our support team will be available to assist if you have any setup issues once you receive your router.
Who pays for shipping?
Domestic customers can choose Free standard shipping. Customers pay shipping costs including customs, duties, processing fees, and taxes (if applicable) for all other options.
Can you ship to my country?
We ship to almost all countries around the world with some exclusions. If you would like to ship to any of these excluded countries, we recommend using PayPal and a Freight forwarding service such as Aramex, MyUS, or Shipito.
Another option if you are located in a country we do not ship to is to purchase a compatible router locally that we can flash remotely for you via our Flash My Router plan. A full list of compatible routers are listed there.
Known excluded countries are:
- Afghanistan
- Algeria
- Angola
- Bangladesh
- Benin
- Bhutan
- Bosnia & Herzegovina
- Botswana
- Brazil
- Burkina Faso
- Burundi
- Cape Verde
- Central African Republic
- Chad
- Comoros
- Congo – Brazzaville
- Congo – Kinshasa
- Cuba
- Djibouti
- Egypt
- Eritrea
- Eswatini
- Ethiopia
- Gabon
- Gambia
- Ghana
- Guinea-Bissau
- India
- Indonesia
- Iran
- Iraq
- Kenya
- Kiribati
- Kosovo
- Laos
- Lesotho
- Liberia
- Libya
- Madagascar
- Malawi
- Malaysia
- Mali
- Mauritania
- Mauritius
- Mayotte
- Mozambique
- Myanmar (Burma)
- Namibia
- Nauru
- Niger
- Nigeria
- Niue
- North Korea
- Palastinian Territories
- Russia
- Rwanda
- Sao Tome & Principe
- Senegal
- Seychelles
- Sierra Leone
- Solomon Islands
- Somalia
- Sudan
- Syria
- Tajikistan
- Tanzania
- Togo
- Tokelau
- Tunisia
- Turkmenistan
- Tuvalu
- Uganda
- Wallis & Futuna
- Western Sahara
- Zambia
- Zimbabwe
2025 - Postal Calendar
We will not be able to ship on the dates below. Your package will be shipped the following business day.
- New Year’s Day: January-01
- Martin Luther King Jr. Day: January-20
- President’s Day: February-17
- Memorial Day: May-26
- Independence Day: July-04
- Labor Day: September-01
- Columbus Day: October-13
- Veteran’s Day: November-11
- Thanksgiving Day: November-27
- Christmas Eve: December-24
- New Year’s Eve: December-31
2025 Holiday Shipping Deadlines
In order to ensure timely delivery of your packages for the holiday season, please refer to the following shipping deadline dates for the following types of mail.
PLEASE NOTE: All deadlines are at 1PM EST of the designated.
US
- USPS Priority 12/18
- USPS APO/FPO/DPO 12/11
- FedEx 12/21
International
International dates are for estimated delivery dates. However, customs can cause issues and may take longer.
- Puerto Rico 12/21
- Canada 12/21
- Mexico 12/21
- UK 12/20
- Hong Kong 12/19
- Australia 12/19
- Middle East 12/19
Regardless of your carrier or country, we recommend that you place your holiday orders as soon as possible to ensure timely delivery.
Customs and Expenses
Will there be extra customs charges when my FlashRouter arrives?
There may be additional customs fees incurred based on the local importation laws of your country. You (the recipient) are responsible for all customs fees charged by your country’s customs agency.
Customs charges are NOT factored into the FlashRouters shipping cost.
All customs fees will be a separate charge and must be paid for by the recipient of the package.
We do our best to inform you of possible customs fees to the best of our ability, however we will not accept returns because of refusal to pay these fees.
If we receive a return due to failure to pay customs fees, you will be refunded but ONLY for the price of the FlashRouter. Original Shipping charges will NOT be refunded.
We do our best to make FlashRouters’ shipping quick and affordable but are unable to foresee all customs-related issues. Please be sure to check before ordering if you are concerned with local customs fees.
Do you charge sales tax?
We will charge sales tax in any state where we are required to do so. Currently that is within New Jersey, due to the fact that this is the physical location of our business and New York but that is subject to change as law dictates.
Any taxes or customs fees that are incurred to your country’s current policies are out of our hands. We do our best to make the router and the shipping quick and affordable.
How to Access Your GL.iNet FlashRouter Settings
This quick guide walk you through connecting to your GL.iNet FlashRouter (Flint, Slate, Beryl, or Marble) and logging into the admin settings page. You’ll use either WiFi or an Ethernet cable, then access the router dashboard through your browser.
Step 1. Connect Your Device to the Router
You can connect by WiFi or Ethernet:
- WiFi: Look for a network name like FlashRouter24 or FlashRouter50
- The WiFi password has been set to: Wireless#9483C
- ⚠️ Be sure to capitalize the “W” in
- Ethernet: Plug an Ethernet cable from your computer into one of the router’s LAN ports (usually marked or color-coded differently from the WAN port).
👉 Pro tip: Disconnect from any other WiFi networks during setup.
Step 2. Open the Router Login Page
- Open a web browser (Chrome, Safari, Firefox, Edge).
- In the address bar, type: 192.168.8.1
- Press Enter.
This is the local router dashboard address (not a public website). If the page doesn’t load:
- Try a different browser.
- Clear your cache.
- Ensure your device is connected to the FlashRouter network.
Step 3. Log In to the Router Settings
- Default password:
glopenwrt1oropenwrt - This is the factory default for all GL.iNet routers shipped by FlashRouters.
💡 Once you’re in, you can update your admin password in the settings for extra security.
Next Steps
Now that you’ve accessed your GL.iNet FlashRouter, you can:
- Set up your VPN service
- Customize your WiFi name and password
- Adjust device controls and security settings
Check our support library for your specific VPN setup guide.
How to Access Your AsusWRT FlashRouter Settings
This quick guide will walk you through connecting to your AsusWRT FlashRouter and logging into the admin settings page. You’ll use either WiFi or an Ethernet cable, then access the router dashboard through your browser.
Step 1. Connect Your Device to the Router
You can connect by WiFi or Ethernet:
- WiFi: Look for a network name like FlashRouter24 or FlashRouter50.
- The WiFi password is set to: Wireless#[First 5 characters of your router’s MAC]
- Example: If your MAC is CC28A07E70A8, your WiFi password is Wireless#CC28A.
- ⚠️ Be sure to capitalize the “W” in Wireless.
- Ethernet: Plug an Ethernet cable from your computer into one of the router’s LAN ports (usually marked or color-coded differently from the WAN port).
👉 Pro tip: Disconnect from any other WiFi networks during setup.
Step 2. Open the Router Login Page
- Open a web browser (Chrome, Safari, Firefox, Edge).
- In the address bar, type: 192.168.50.1 or go to asusrouter.com
- Press Enter.
This is the local router dashboard address (not a public website). If the page doesn’t load:
- Try a different browser.
- Clear your cache.
- Ensure your device is connected to the FlashRouter network.
Step 3. Log In to the Router Settings
- Default username:
flashrouter - Default password:
asuswrt-admin1 - Some older devices may use:
asuswrt1orasuswrt - This is the factory default for AsusWRT routers shipped by FlashRouters.
💡 Once you’re in, you can update your admin password in the settings for extra security.
Next Steps
Now that you’ve accessed your AsusWRT FlashRouter, you can:
- Set up your VPN service
- Customize your WiFi name and password
- Adjust device controls and security settings
Check our support library for your specific VPN setup guide.
Untangle Support
Support for Untangle Router NG Firewall features is provided by the Untangle Support team and not the FlashRouter support team.
We recommend reviewing these excellent resources that Untangle has created to get you setup as desired.
To contact Untangle directly you can email them at support@untangle.com and their team would be happy to assist you with getting setup to use their NG Firewall settings such as Web Monitor, Captive Portal, Intrusion Prevention, and many other features supported by the Untangle firmware running on your FlashRouter.
TP-Link Router Setup Guide
Quick Start Guide for TP-Link FlashRouters
Find setup guides, FAQs and troubleshooting tips for TP-Link configured FlashRouters.
Archer AX10000, Archer AX1100, Archer AX21, Archer AX3000, Archer AX3000 Pro, Archer AX3200, Archer AX4400, Archer AX5400 Pro, Archer AX55, Archer AX55 Pro
Archer AX6000, Archer AX72 Pro, Archer AX73, Archer AX75, Archer AX80, Archer AX90
Archer AXE300, Archer AXE5400, Archer AXE75, Archer AXE95
Archer BE550, Archer BE800, Archer BE900, Archer BE9300, Archer GE80, Archer GX90
Search Support Articles
Troubleshooting
More Ways to Get Help
How do I access my Roqos device settings?
Your Roqos Core’s settings or UI (User Interface) is accessible via a secure cloud based connection rather than the typical local access of other routers. This means that you can manage your Roqos from anywhere in the world not just at home.
Visit the Roqos Login URL
From any device that has a browser such as a computer, smartphone, or tablet visit login.roqos.com
Login with your Roqos account
Enter in the email and password that you set when your Roqos was initially setup. If you still need to create your Roqos account and activate your Roqos follow our Activate and Connect Roqos to Internet guide.
Proceed with making the changes to the settings you desire
Now that you are logged in to your Roqos UI you adjust any settings as you see fit for your network. For guides on how to make specific changes to your Roqos view our Roqos Setup Guide area.
PrivateInternetAccess (PIA) Manual OpenVPN Setup
Preparing for Manual PIA Setup
Verify your PIA login information
If you are not already a PIA user Sign Up Now.
Log in to your account on the PIA website.
PIA Server Addresses
The below servers are the only servers compatible with PIA router connections. Dedicated IP Addresses are not able to connect via routers.
United States
us-california.privacy.network
us-newjersey.privacy.network
us-chicago.privacy.network
us-texas.privacy.network
us-florida.privacy.network
us-seattle.privacy.network
us3.privacy.network
us-siliconvalley.privacy.network
us-newyorkcity.privacy.network
us-washingtondc.privacy.network
us-atlanta.privacy.network
us-houston.privacy.network
us-denver.privacy.network
United Kingdom
uk-london.privacy.network
uk-manchester.privacy.network
Canada
ca-toronto.privacy.network
ca-montreal.privacy.network
Australia
au-sydney.privacy.network
aus-melbourne.privacy.network
aus-perth.privacy.network
Germany
de-berlin.privacy.network
de-frankfurt.privacy.network
Rest of the World
ae.privacy.network
austria.privacy.network
dz.privacy.network
ad.privacy.network
ar.privacy.network
yerevan.privacy.network
bahamas.privacy.network
bangladesh.privacy.network
brussels.privacy.network
sofia.privacy.network
cambodia.privacy.network
china.privacy.network
cyprus.privacy.network
czech.privacy.network
denmark.privacy.network
egypt.privacy.network
fi.privacy.network
france.privacy.network
georgia.privacy.network
greenland.privacy.network
hungary.privacy.network
is.privacy.network
in.privacy.network
iran.privacy.network
ireland.privacy.network
man.privacy.network
israel.privacy.network
italy.privacy.network
japan.privacy.network
kazakhstan.privacy.network
liechtenstein.privacy.network
lu.privacy.network
macau.privacy.network
malta.privacy.network
mexico.privacy.network
md.privacy.network
monaco.privacy.network
mongolia.privacy.network
montenegro.privacy.network
morocco.privacy.network
nl-amsterdam.privacy.network
nz.privacy.network
nigeria.privacy.network
no.privacy.network
panama.privacy.network
philippines.privacy.network
poland.privacy.network
qatar.privacy.network
ro.privacy.network
rs.privacy.network
saudiarabia.privacy.network
spain.privacy.network
srilanka.privacy.network
sweden.privacy.network
swiss.privacy.network
sg.privacy.network
tr.privacy.network
taiwan.privacy.network
ua.privacy.network
venezuela.privacy.network
vietnam.privacy.network
za.privacy.network
DD-WRT Router Setup for PIA
Navigate to Services > VPN
PIA offers two different Encryption levels.
Default Encryption (AES-128) typically provides faster speeds.
Strong Encryption (AES-256) provides stronger encryption.
Follow the table below of the one that fits your needs.
Enter PIA settings (Default Encryption)
OpenVPN Client
Start OpenVPN Client
If you wish to disable your VPN connection simply set this to Disable at any time and click Apply Settings.
Server IP/Name
Copy and paste the server you would like to connect to from the server list above. Be sure there are no extra spaces or characters.
If you wish to change PIA connection locations, THIS IS THE ONLY FIELD YOU NEED TO CHANGE.
Port
1198
Tunnel Device
TUN
Tunnel Protocol
UDP
Encryption cipher
AES-128-CBC
Hash Algorithm
SHA1
First Data Cipher
Not set
Second Data Cipher
Not set
Third Data Cipher
Not set
Userpass Authentication
Enable
Username
Enter the Username you successfully logged in to your PIA account with.
Password
Enter the Password you successfully logged in to your PIA account with.
Advanced Options
Enable
TLS Cipher
None
LZO Compression
Disabled
NAT
Enable
Firewall Protection
Enable
Additional Config
persist-key
persist-tun
Policy Based Routing
This field can be used for split VPN and Dual Gateway routing.
CA Cert
-----BEGIN CERTIFICATE----- MIIFqzCCBJOgAwIBAgIJAKZ7D5Yv87qDMA0GCSqGSIb3DQEBDQUAMIHoMQswCQYD VQQGEwJVUzELMAkGA1UECBMCQ0ExEzARBgNVBAcTCkxvc0FuZ2VsZXMxIDAeBgNV BAoTF1ByaXZhdGUgSW50ZXJuZXQgQWNjZXNzMSAwHgYDVQQLExdQcml2YXRlIElu dGVybmV0IEFjY2VzczEgMB4GA1UEAxMXUHJpdmF0ZSBJbnRlcm5ldCBBY2Nlc3Mx IDAeBgNVBCkTF1ByaXZhdGUgSW50ZXJuZXQgQWNjZXNzMS8wLQYJKoZIhvcNAQkB FiBzZWN1cmVAcHJpdmF0ZWludGVybmV0YWNjZXNzLmNvbTAeFw0xNDA0MTcxNzM1 MThaFw0zNDA0MTIxNzM1MThaMIHoMQswCQYDVQQGEwJVUzELMAkGA1UECBMCQ0Ex EzARBgNVBAcTCkxvc0FuZ2VsZXMxIDAeBgNVBAoTF1ByaXZhdGUgSW50ZXJuZXQg QWNjZXNzMSAwHgYDVQQLExdQcml2YXRlIEludGVybmV0IEFjY2VzczEgMB4GA1UE AxMXUHJpdmF0ZSBJbnRlcm5ldCBBY2Nlc3MxIDAeBgNVBCkTF1ByaXZhdGUgSW50 ZXJuZXQgQWNjZXNzMS8wLQYJKoZIhvcNAQkBFiBzZWN1cmVAcHJpdmF0ZWludGVy bmV0YWNjZXNzLmNvbTCCASIwDQYJKoZIhvcNAQEBBQADggEPADCCAQoCggEBAPXD L1L9tX6DGf36liA7UBTy5I869z0UVo3lImfOs/GSiFKPtInlesP65577nd7UNzzX lH/P/CnFPdBWlLp5ze3HRBCc/Avgr5CdMRkEsySL5GHBZsx6w2cayQ2EcRhVTwWp cdldeNO+pPr9rIgPrtXqT4SWViTQRBeGM8CDxAyTopTsobjSiYZCF9Ta1gunl0G/ 8Vfp+SXfYCC+ZzWvP+L1pFhPRqzQQ8k+wMZIovObK1s+nlwPaLyayzw9a8sUnvWB /5rGPdIYnQWPgoNlLN9HpSmsAcw2z8DXI9pIxbr74cb3/HSfuYGOLkRqrOk6h4RC OfuWoTrZup1uEOn+fw8CAwEAAaOCAVQwggFQMB0GA1UdDgQWBBQv63nQ/pJAt5tL y8VJcbHe22ZOsjCCAR8GA1UdIwSCARYwggESgBQv63nQ/pJAt5tLy8VJcbHe22ZO sqGB7qSB6zCB6DELMAkGA1UEBhMCVVMxCzAJBgNVBAgTAkNBMRMwEQYDVQQHEwpM b3NBbmdlbGVzMSAwHgYDVQQKExdQcml2YXRlIEludGVybmV0IEFjY2VzczEgMB4G A1UECxMXUHJpdmF0ZSBJbnRlcm5ldCBBY2Nlc3MxIDAeBgNVBAMTF1ByaXZhdGUg SW50ZXJuZXQgQWNjZXNzMSAwHgYDVQQpExdQcml2YXRlIEludGVybmV0IEFjY2Vz czEvMC0GCSqGSIb3DQEJARYgc2VjdXJlQHByaXZhdGVpbnRlcm5ldGFjY2Vzcy5j b22CCQCmew+WL/O6gzAMBgNVHRMEBTADAQH/MA0GCSqGSIb3DQEBDQUAA4IBAQAn a5PgrtxfwTumD4+3/SYvwoD66cB8IcK//h1mCzAduU8KgUXocLx7QgJWo9lnZ8xU ryXvWab2usg4fqk7FPi00bED4f4qVQFVfGfPZIH9QQ7/48bPM9RyfzImZWUCenK3 7pdw4Bvgoys2rHLHbGen7f28knT2j/cbMxd78tQc20TIObGjo8+ISTRclSTRBtyC GohseKYpTS9himFERpUgNtefvYHbn70mIOzfOJFTVqfrptf9jXa9N8Mpy3ayfodz 1wiqdteqFXkTYoSDctgKMiZ6GdocK9nMroQipIQtpnwd4yBDWIyC6Bvlkrq5TQUt YDQ8z9v+DMO6iwyIDRiU -----END CERTIFICATE-----
CLICK APPLY SETTINGS
Leave all settings not mentioned above as their default setting.
Enter PIA settings (Strong Encryption)
OpenVPN Client
Start OpenVPN Client
If you wish to disable your VPN connection simply set this to Disable at any time and click Apply Settings.
Server IP/Name
Copy and paste the server you would like to connect to from the server list above. Be sure there are no extra spaces or characters.
If you wish to change PIA connection locations, THIS IS THE ONLY FIELD YOU NEED TO CHANGE.
Port
1197
Tunnel Device
TUN
Tunnel Protocol
UDP
Encryption cipher
AES-256-CBC
Hash Algorithm
SHA256
First Data Cipher
Not set
Second Data Cipher
Not set
Third Data Cipher
Not set
Userpass Authentication
Enable
Username
Enter the Username you successfully logged in to your PIA account with.
Password
Enter the Password you successfully logged in to your PIA account with.
Advanced Options
Enable
TLS Cipher
None
LZO Compression
Adaptive
NAT
Enable
Firewall Protection
Enable
Additional Config
persist-key
persist-tun
Policy Based Routing
This field can be used for split VPN and Dual Gateway routing.
CA Cert
-----BEGIN CERTIFICATE----- MIIHqzCCBZOgAwIBAgIJAJ0u+vODZJntMA0GCSqGSIb3DQEBDQUAMIHoMQswCQYD VQQGEwJVUzELMAkGA1UECBMCQ0ExEzARBgNVBAcTCkxvc0FuZ2VsZXMxIDAeBgNV BAoTF1ByaXZhdGUgSW50ZXJuZXQgQWNjZXNzMSAwHgYDVQQLExdQcml2YXRlIElu dGVybmV0IEFjY2VzczEgMB4GA1UEAxMXUHJpdmF0ZSBJbnRlcm5ldCBBY2Nlc3Mx IDAeBgNVBCkTF1ByaXZhdGUgSW50ZXJuZXQgQWNjZXNzMS8wLQYJKoZIhvcNAQkB FiBzZWN1cmVAcHJpdmF0ZWludGVybmV0YWNjZXNzLmNvbTAeFw0xNDA0MTcxNzQw MzNaFw0zNDA0MTIxNzQwMzNaMIHoMQswCQYDVQQGEwJVUzELMAkGA1UECBMCQ0Ex EzARBgNVBAcTCkxvc0FuZ2VsZXMxIDAeBgNVBAoTF1ByaXZhdGUgSW50ZXJuZXQg QWNjZXNzMSAwHgYDVQQLExdQcml2YXRlIEludGVybmV0IEFjY2VzczEgMB4GA1UE AxMXUHJpdmF0ZSBJbnRlcm5ldCBBY2Nlc3MxIDAeBgNVBCkTF1ByaXZhdGUgSW50 ZXJuZXQgQWNjZXNzMS8wLQYJKoZIhvcNAQkBFiBzZWN1cmVAcHJpdmF0ZWludGVy bmV0YWNjZXNzLmNvbTCCAiIwDQYJKoZIhvcNAQEBBQADggIPADCCAgoCggIBALVk hjumaqBbL8aSgj6xbX1QPTfTd1qHsAZd2B97m8Vw31c/2yQgZNf5qZY0+jOIHULN De4R9TIvyBEbvnAg/OkPw8n/+ScgYOeH876VUXzjLDBnDb8DLr/+w9oVsuDeFJ9K V2UFM1OYX0SnkHnrYAN2QLF98ESK4NCSU01h5zkcgmQ+qKSfA9Ny0/UpsKPBFqsQ 25NvjDWFhCpeqCHKUJ4Be27CDbSl7lAkBuHMPHJs8f8xPgAbHRXZOxVCpayZ2SND fCwsnGWpWFoMGvdMbygngCn6jA/W1VSFOlRlfLuuGe7QFfDwA0jaLCxuWt/BgZyl p7tAzYKR8lnWmtUCPm4+BtjyVDYtDCiGBD9Z4P13RFWvJHw5aapx/5W/CuvVyI7p Kwvc2IT+KPxCUhH1XI8ca5RN3C9NoPJJf6qpg4g0rJH3aaWkoMRrYvQ+5PXXYUzj tRHImghRGd/ydERYoAZXuGSbPkm9Y/p2X8unLcW+F0xpJD98+ZI+tzSsI99Zs5wi jSUGYr9/j18KHFTMQ8n+1jauc5bCCegN27dPeKXNSZ5riXFL2XX6BkY68y58UaNz meGMiUL9BOV1iV+PMb7B7PYs7oFLjAhh0EdyvfHkrh/ZV9BEhtFa7yXp8XR0J6vz 1YV9R6DYJmLjOEbhU8N0gc3tZm4Qz39lIIG6w3FDAgMBAAGjggFUMIIBUDAdBgNV HQ4EFgQUrsRtyWJftjpdRM0+925Y6Cl08SUwggEfBgNVHSMEggEWMIIBEoAUrsRt yWJftjpdRM0+925Y6Cl08SWhge6kgeswgegxCzAJBgNVBAYTAlVTMQswCQYDVQQI EwJDQTETMBEGA1UEBxMKTG9zQW5nZWxlczEgMB4GA1UEChMXUHJpdmF0ZSBJbnRl cm5ldCBBY2Nlc3MxIDAeBgNVBAsTF1ByaXZhdGUgSW50ZXJuZXQgQWNjZXNzMSAw HgYDVQQDExdQcml2YXRlIEludGVybmV0IEFjY2VzczEgMB4GA1UEKRMXUHJpdmF0 ZSBJbnRlcm5ldCBBY2Nlc3MxLzAtBgkqhkiG9w0BCQEWIHNlY3VyZUBwcml2YXRl aW50ZXJuZXRhY2Nlc3MuY29tggkAnS7684Nkme0wDAYDVR0TBAUwAwEB/zANBgkq hkiG9w0BAQ0FAAOCAgEAJsfhsPk3r8kLXLxY+v+vHzbr4ufNtqnL9/1Uuf8NrsCt pXAoyZ0YqfbkWx3NHTZ7OE9ZRhdMP/RqHQE1p4N4Sa1nZKhTKasV6KhHDqSCt/dv Em89xWm2MVA7nyzQxVlHa9AkcBaemcXEiyT19XdpiXOP4Vhs+J1R5m8zQOxZlV1G tF9vsXmJqWZpOVPmZ8f35BCsYPvv4yMewnrtAC8PFEK/bOPeYcKN50bol22QYaZu LfpkHfNiFTnfMh8sl/ablPyNY7DUNiP5DRcMdIwmfGQxR5WEQoHL3yPJ42LkB5zs 6jIm26DGNXfwura/mi105+ENH1CaROtRYwkiHb08U6qLXXJz80mWJkT90nr8Asj3 5xN2cUppg74nG3YVav/38P48T56hG1NHbYF5uOCske19F6wi9maUoto/3vEr0rnX JUp2KODmKdvBI7co245lHBABWikk8VfejQSlCtDBXn644ZMtAdoxKNfR2WTFVEwJ iyd1Fzx0yujuiXDROLhISLQDRjVVAvawrAtLZWYK31bY7KlezPlQnl/D9Asxe85l 8jO5+0LdJ6VyOs/Hd4w52alDW/MFySDZSfQHMTIc30hLBJ8OnCEIvluVQQ2UQvoW +no177N9L2Y+M9TcTA62ZyMXShHQGeh20rb4kK8f+iFX8NxtdHVSkxMEFSfDDyQ= -----END CERTIFICATE-----
CLICK APPLY SETTINGS
Leave all settings not mentioned above as their default setting.
Verify a successful PIA connection
Navigate to Status > OpenVPN
- You should now see a CONNECTED SUCCESS message.
- Visit PIA’s IP Check to verify your new IP address and virtual location.
In some cases you may notice that the location is not showing the same location as the server you have input in your router settings; this is because geo tracking tools are often tricked by VPN connections. As long as you see an IP address that is not the same as your normal Internet IP address then you are indeed connected to PIA.
Back up your settings
Navigate to Administration > Backup
- Click the Backup button.
- A file named nvrambak.bin will be saved to your computer.
- You can load nvrambak.bin to restore your settings in the event of a reset.
How to change the PIA server
- Copy the new PIA server address from the above server list.
- Paste the server into the Server IP/Name field.
- Click Apply Settings.
Private Internet Access VPN Setup Guide for Privacy Hero
Your Privacy Hero router uses Cloud Based router management which means you can access the router settings from anywhere on any device that has an internet connection. You can follow these steps while connected to your phone, other Wi-Fi network, or the Privacy Hero network
1. From any device that has a browser such as a computer, smartphone, or tablet visit app.privacyhero.com.
2. Enter your Privacy Hero account email and password. Click Login.
3. Click the VPN symbol.
4. Click the Change button and select Private Internet Access from the dropdown.
5. Enter your correct PIA account login username and password and click Save.
6. Click Save if you want to automatically connect to the ideal server location as recommended by Private Internet Access.
Or, connect to a specific server location click Advanced Options and then type in the PIA server name you would like to use. (All server names are noted below).
Then click Save.
North America
bahamas.privacy.network
ca-ontario.privacy.network
ca-toronto.privacy.network
ca-vancouver.privacy.network
ca-montreal.privacy.network
greenland.privacy.network
gt-guatemala-pf.privacy.network
mexico.privacy.network
panama.privacy.network
sanjose.privacy.network
us-alabama-pf.privacy.network
us-alaska-pf.privacy.network
us-arkansas-pf.privacy.network
us-atlanta.privacy.network
us-california.privacy.network
us-chicago.privacy.network
us-connecticut-pf.privacy.network
us-denver.privacy.network
us-florida.privacy.network
us-houston.privacy.network
us-idaho-pf.privacy.network
us-indiana-pf.privacy.network
us-iowa-pf.privacy.network
us-kansas-pf.privacy.network
us-kentucky-pf.privacy.network
us-lasvegas.privacy.network
us-louisiana-pf.privacy.network
us-maine-pf.privacy.network
us-massachusetts-pf.privacy.network
us-michigan-pf.privacy.network
us-minnesota-pf.privacy.network
us-mississippi-pf.privacy.network
us-missouri-pf.privacy.network
us-montana-pf.privacy.network
us-nebraska-pf.privacy.network
us-new-hampshire-pf.privacy.network
us-new-mexico-pf.privacy.network
us-newyorkcity.privacy.network
us-north-carolina-pf.privacy.network
us-north-dakota-pf.privacy.network
us-ohio-pf.privacy.network
us-oklahoma-pf.privacy.network
us-oregon-pf.privacy.network
us-pennsylvania-pf.privacy.network
us-rhode-island-pf.privacy.network
us-seattle.privacy.network
us-siliconvalley.privacy.network
us-south-carolina-pf.privacy.network
us-south-dakota-pf.privacy.network
us-texas.privacy.network
us-tennessee-pf.privacy.network
us-vermont-pf.privacy.network
us-virginia-pf.privacy.network
us-washingtondc.privacy.network
us-west-virginia-pf.privacy.network
us-wisconsin-pf.privacy.network
us-wyoming-pf.privacy.network
us3.privacy.network
us-baltimore.privacy.network
us-honolulu.privacy.network
us-newjersey.privacy.network
us-saltlakecity.privacy.network
us-streaming-2.privacy.network
us-streaming.privacy.network
us-wilmington.privacy.network
South America
ar.privacy.network
bo-bolivia-pf.privacy.network
bogota.privacy.network
br.privacy.network
ec-ecuador-pf.privacy.network
pe-peru-pf.privacy.network
santiago.privacy.network
uy-uruguay-pf.privacy.network
venezuela.privacy.network
Europe
al.privacy.network
ad.privacy.network
austria.privacy.network
brussels.privacy.network
ba.privacy.network
sofia.privacy.network
zagreb.privacy.network
czech.privacy.network
de-berlin.privacy.network
de-frankfurt.privacy.network
denmark.privacy.network
denmark-2.privacy.network
spain.privacy.network
es-valencia.privacy.network
ee.privacy.network
fi.privacy.network
fi-2.privacy.network
france.privacy.network
gr.privacy.network
hungary.privacy.network
italy.privacy.network
italy-2.privacy.network
is.privacy.network
ireland.privacy.network
man.privacy.network
lv.privacy.network
liechtenstein.privacy.network
lt.privacy.network
lu.privacy.network
malta.privacy.network
md.privacy.network
monaco.privacy.network
montenegro.privacy.network
nl-amsterdam.privacy.network
mk.privacy.network
no.privacy.network
poland.privacy.network
pt.privacy.network
ro.privacy.network
sweden.privacy.network
sweden-2.privacy.network
rs.privacy.network
sk.privacy.network
slovenia.privacy.network
swiss.privacy.network
tr.privacy.network
uk-london.privacy.network
uk-manchester.privacy.network
uk-southampton.privacy.network
uk-2.privacy.network
ua.privacy.network
Asia
ae.privacy.network
bangladesh.privacy.network
cambodia.privacy.network
china.privacy.network
cyprus.privacy.network
georgia.privacy.network
hk.privacy.network
in.privacy.network
israel.privacy.network
jakarta.privacy.network
japan.privacy.network
japan-2.privacy.network
kazakhstan.privacy.network
kr-south-korea-pf.privacy.network
kualalumpur.privacy.network
macau.privacy.network
mongolia.privacy.network
np-nepal-pf.privacy.network
philippines.privacy.network
qatar.privacy.network
saudiarabia.privacy.network
sg.privacy.network
srilanka.privacy.network
taiwan.privacy.network
vietnam.privacy.network
yerevan.privacy.network
Oceania
au-adelaide-pf.privacy.network
au-australia-so.privacy.network
au-brisbane-pf.privacy.network
aus-melbourne.privacy.network
aus-perth.privacy.network
au-sydney.privacy.network
nz.privacy.network
Africa
dz.privacy.network
egypt.privacy.network
morocco.privacy.network
nigeria.privacy.network
za.privacy.network
8. Your Privacy Hero settings should now show a Connected message, indicating you have successfully signed in to your PIA VPN server!
1. From any device that has a browser such as a computer, smartphone, or tablet visit app.privacyhero.com.
2. Enter your Privacy Hero account email and password. Click Login.
3. Click the VPN symbol.
4. Click the Change button and select Custom from the dropdown and choose the OpenVPN option.
5. Enter your PIA Account login as the Username and Password.
6. Now log in to your PIA Account page.
7. Go to the Downloads section.
8. Scroll down to the bottom of the page, and go to OpenVPN Configuration Generator.
9. Choose OpenVPN 2.4 or newer and Linux.
10. From the Select Port section, choose UDP/1198 AES-128-CBC for a faster connection or choose UDP/1197 AES-256-CBC for stronger security as shown in the image below then Click Generate to download the server configuration file.
11. Drag and drop or click to Upload the server file into the Custom box on your Privacy Hero settings page then click Save.
12. Your Privacy Hero settings should now show a Connected message, indicating you have successfully signed in to your PIA VPN server!
Privacy Hero’s cloud based router settings access makes it so you can change settings while not connected to the Privacy Hero network. Visit the Private Internet Access IP Check to verify your VPN IP address. If it has not changed be sure to double check that you are indeed connected to the Privacy Hero network.
Keep in mind that the VPN connection will not change the location of the streaming services listed in the Streaming Relocation area of the Privacy Hero settings.
Privacy Hero Change VPN Providers
Your Privacy Hero router uses Cloud Based router management which means you can access the router settings from anywhere on any device that has an internet connection. You can follow these steps while connected to your phone, other Wi-Fi network, or the Privacy Hero network.
Each Privacy Hero router comes with a year free of Privacy Hero WireGuard VPN and can be setup for NordVPN and Surfshark users as well. Use these steps to change between the VPN providers to find the best connection for your needs.
1. From any device that has a browser such as a computer, smartphone, or tablet visit app.privacyhero.com
2. Enter your Privacy Hero account email and password. Click Login.
If you have not created your Privacy Hero account yet please follow these instructions.
3. Click the VPN symbol.
4. Click the Change button and select the VPN provider that you want to use.
My 5.0GHz network is not showing up
Verify the device supports 5GHz
5.0GHz networks are not compatible with all devices so first make sure that you device’s wireless adapter supports 5GHz wireless frequencies.
If you are not sure, find out if your device support 5 GHz via Google search or by looking in the wireless hardware details in the device’s network settings. If you see Wireless a/b/g/n support then you have a compatible device. If you are missing the Wireless a then this means there is no 5 GHz support.
Enter the recommended wireless settings
Our team has tested the wireless functionality for each FlashRouter that we offer and shared our recommended wireless settings in our Wifi Setup area. Replicate the settings for your FlashRouter model found on that page.
Lower the wireless channel
Some devices do support 5.0GHz connections but not the higher channels that DD-WRT firmware offers.
Navigate to Wireless > Basic Settings
Lower the wireless channel setting for the 5.0GHz band that is not showing. Based on our tests the most broadly compatible channels are 36, 48 and 161.
CLICK APPLY SETTINGS
Refresh your device's network adapter
The easiest way to accomplish this is by rebooting your device as the settings to reset your adapter may vary on all types of internet connected devices.
Review wireless Status
Navigate to Status > Wireless
The readouts on this page can help tell if there are errors with the FlashRouter’s wireless. View our article on how to read the Wireless Status page for more information.
DD-WRT Router Setup Guide
Quick Start Guide for DD-WRT FlashRouters
Find setup guides, FAQs and troubleshooting tips for DD-WRT configured FlashRouters.
AC1450, R6220, R6230, R6250, R6260, R6300 V1, R6300 V2, R6400 V1, R6400 V2, R6700 V1, R6700 V2, R6700 V3, R7000, R7000P, R7800, R8000, R9000, XR500
RT-AC56U/R, RT-AC68U V1, RT-AC68U V2, RT-AC1900P, RT-AC87U, RT-AC3100, RT-AC5300
WRT1200AC, WRT1900AC V1, WRT1900AC V2, WRT1900ACS V1, WRT1900ACS V2, WRT32X, WRT3200ACM
Search Support Articles
Troubleshooting
- Why can’t I send emails while connected to VPN?
- What is a DNS leak and how can I prevent a DNS leak in my router?
- My VPN stopped working on my FlashRouter.
- Why is my connection speed slower?
- Why are streaming services blocked while connected to VPN?
- How do I find my router local IP address?
- How do I reset and reconfigure my FlashRouter?
- How do I check for static network settings on my devices?
- Why is my router not connecting to internet?
- How to fix an Unidentified Network or Limited Connection.
- Why are some of my devices not connecting to the internet?
- Why is the internet LED red on my router?
- Why is the power light on my FlashRouter blinking?
- My 2.4GHz network is not showing up
- My 5.0GHz network is not showing up
- My WiFi password is not working
- Why did my WiFi SSID change to ‘dd-wrt’?
- Why are devices disconnecting from Wireless?
- Why is my WiFi signal weak?
More Ways to Get Help
VPN Router Setup Guides & FAQs | FlashRouters Help Center
Support Guides
Select your router type
Router Models
Privacy Hero, Privacy Hero 2
Router Models
ASUS
- RT Series: RT-AC68U, RT-AC88U, RT-AC3100, RT-AC5300, RT-AC86U, RT-AX56U, RT-AX58U, RT-AX68U, RT-AX86U. RT-AX86U-PRO, RT-AX88U, RT-AX88U-PRO, RT-BE86U, RT-BE88U, RT-BE92U, RT-BE96U
- GT Series: GT-AC2900, GT-AX6000, GT-AX11000, GT-AXE11000,GT-AXE11000-PRO, GT-AXE16000, GT-BE98_PRO
- ZenWiFi Pro XT12
Router Models
WR3000, M1800, M3000
Router Models
GT series: GT6, GT-AXE16000, GT-AX11000 Pro, GT-AXE11000, GT-AX6000, GT-AX11000, GS-AX5400, GS-AX3000
ZenWiFi: ZenWiFi Pro XT12, ZenWiFi Pro ET12, ZenWiFi XT9, ZenWiFi AX (XT8), ZenWiFi ET8, ZenWiFi XD6, ZenWiFi XD5
RT series: RT-AXE7800, RT-AX88U Pro, RT-AX88U, RT-AX86U Pro, RT-AX86U, RT-AX86S, RT-AX68U, RT-AX82U, RT-AX58U, RT-AX3000, RT-AX59U, RT-AX92U
TUF series: TUF-AX5400, TUF-AX3000_V2, TUF-AX3000, TUF Gaming AX6000, TUF Gaming AX4200
Router Models
Archer AX10000, Archer AX1100, Archer AX21, Archer AX3000, Archer AX3000 Pro, Archer AX3200, Archer AX4400, Archer AX5400 Pro, Archer AX55, Archer AX55 Pro
Archer AX6000, Archer AX72 Pro, Archer AX73, Archer AX75, Archer AX80, Archer AX90
Archer AXE300, Archer AXE5400, Archer AXE75, Archer AXE95
Archer BE550, Archer BE800, Archer BE900, Archer BE9300, Archer GE80, Archer GX90
Router Models
Flint 2 GL-MT6000, Flint GL-AX1800, Slate GL-AXT1800, Beryl GL-MT3000, Marble GL-B3000
Router Models
Roqos Core Router, Roqos SASE Appliance
Router Models
NETGEAR
AC1450, R6220, R6230, R6250, R6260, R6300 V1, R6300 V2, R6400 V1, R6400 V2, R6700 V1, R6700 V2, R6700 V3, R7000, R7000P, R7800, R8000, R9000, XR500
ASUS
RT-AC56U/R, RT-AC68U V1, RT-AC68U V2, RT-AC1900P, RT-AC87U, RT-AC3100, RT-AC5300
LINKSYS
WRT1200AC, WRT1900AC V1, WRT1900AC V2, WRT1900ACS V1, WRT1900ACS V2, WRT32X, WRT3200ACM
Router Models
ExpressVPN Aircove, Aircove Go
NETGEAR
R6300 V2, R6400 V2, R6700 V3, R7000, R7000P
ASUS
RT-AC56U, RT-AC56R, RT-AC56S, RT-AC68U V3, RT-AC87U
LINKSYS
EA6200, WRT1200AC, WRT1900AC V1, WRT1900AC V2, WRT1900ACS V1, WRT1900ACS V2, WRT32X, WRT3200ACM
Search Support Articles
Top Router Questions
- How do I upgrade the DD-WRT firmware of my FlashRouter?
- Roqos VPN Connected, but my device IP is unchanged
- How do I access my Roqos device settings?
- Why can’t I access router settings?
- How do I reset and reconfigure my ExpressVPN/Aircove FlashRouter?
- How do I reset and reconfigure my FlashRouter?
- How do I change my Wireless Password?
- My 2.4GHz network is not showing up
- My 5.0GHz network is not showing up
- My WiFi password is not working
- Why can’t I connect to WiFi using the WPS button feature?
- Access FlashRouter DD-WRT firmware settings
More Ways to Get Help
ExpressVPN Router Setup Guide
Quick Start Guide for ExpressVPN FlashRouters
Find setup guides, FAQs and troubleshooting tips for ExpressVPN configured FlashRouters.
Aircove
R6300 V2, R6400 V2, R6700 V3, R7000, R7000P
RT-AC56U, RT-AC56R, RT-AC56S, RT-AC68U V3, RT-AC87U
EA6200, WRT1200AC, WRT1900AC V1, WRT1900AC V2, WRT1900ACS V1, WRT1900ACS V2, WRT32X, WRT3200ACM
WiFi Setup
VPN Setup
- Change server locations on ExpressVPN/Aircove firmware
- Using Device Groups to connect to multiple VPN locations on ExpressVPN/Aircove firmware
- Using Device Groups to bypass VPN on ExpressVPN/Aircove firmware
- Change VPN Protocols on ExpressVPN/Aircove firmware
- ExpressVPN TP-Link OpenVPN Setup
- ExpressVPN Cudy OpenVPN Setup
- ExpressVPN Asus AX1800S OpenVPN Setup
- Flint/Slate GL.iNet ExpressVPN OpenVPN Setup
- ExpressVPN Merlin OpenVPN Setup
ExpressVPN Features
Search Support Articles
Troubleshooting
More Ways to Get Help
Wireless Repeater Bridge Setup
If you need to extend your connection capabilities and you are not able to wire directly into your main router, you can setup a FlashRouter as a Wireless Repeater Bridge. In Wireless Repeater Bridge mode the FlashRouter connects to your main router on the same subnet via WiFi, and then transmits your internet signal via the FlashRouter for internet access anywhere in your home or office.
Preparing for Wireless Repeater Bridge Setup
Verify your wireless information
In order to setup your FlashRouter as a Wireless Repeater Bridge, you will need the exact SSID and password of your existing wireless network. Make sure you have this information before proceeding.
We recommend using a 2.4GHz network to repeat as this network will have more range. Be sure to click Add under the 2.4GHz settings and not the 5GHz settings.
Locate the Local IP Address of the existing wireless network
Locate the Local IP Address of the existing router that the FlashRouter will be bridged to.
DD-WRT Router Setup for Wireless Repeater Bridge
Disable Firewall
Navigate to Security > Firewall
- Set SPI Firewall to Disable.
- Uncheck all boxes except for Filter Multicast.
- Click Save.
Disable DNSmasq
Navigate to Services > Services
- Set DNSmasq to Disable.
- Click Save.
Enter Wireless settings
Navigate to Wireless > Basic Settings
Select Add in the Virtual Interface area.
In the Wireless Physical Interface settings for the 2.4GHz network set the Wireless Mode to Repeater Bridge.
Change the Wireless Network Name (SSID) to match exactly with the Wireless Network Name of the network that you will bridge to.
In the Virtual Interfaces settings change the Wireless Network Name (SSID) to FlashRouter24 or any other unique SSID.
CLICK SAVE
Enter Wireless Security settings
Navigate to Wireless > Wireless Security
- Duplicate the wireless security settings that are set for the other bands for the newly created virtual interface.
- Change the WPA Shared Key to match exactly with the Wireless Password of the network that you will bridge to.
- Click Save.
Change the FlashRouter's Local IP Address
Navigate to Setup > Basic Setup
- Set the Local IP Address to a different address on the same subnet as the existing network that you noted early. (example: if the existing network is 192.168.1.1 then set the Local IP Address to 192.168.1.2)
- Set the Gateway to the Local IP Address of the existing network. (example: 192.168.1.1)
- Set the Local DNS to the Local IP Address of the existing network. (example: 192.168.1.1)
- Click Save.
Change the FlashRouter's Operating Mode
Navigate to Setup > Advanced Routing
- Set the Operating Mode to Router.
- Click Apply Settings.
Reboot your FlashRouter
Power off the FlashRouter for 30 seconds and then power it back on. When it boots back up you will be able to access the FlashRouter’s settings at the new Local IP Address that you set. Your existing network and the FlashRouter’s network will now be bridged wirelessly.
Back up your settings
Navigate to Administration > Backup
- Click the Backup button.
- A file named nvrambak.bin will be saved to your computer.
- You can load nvrambak.bin to restore your settings in the event of a reset.
Getting Started With Your FlashRouter
Getting Started With Your FlashRouter
Setting Up Your VPN Service
Select your operating system below to setup the FlashRouters Privacy App on your router, the easiest way to connect to the best VPN services. For ExpressVPN FlashRouter users, please view the following section for setting up the ExpressVPN app.
IPv6 Internet Setup
Most ISPs only support IPv4. Unless your ISP supports IPv6 then enabling it on the FlashRouter will not enable it across your network.
For most VPN users IPv6 should remain disabled as the VPN connection was designed to operate under IPv4 addresses only. Enabling IPv6 in this instance may compromise the security of the VPN tunnel.
We typically only recommend enabling IPv6 if you are not using VPN or if your VPN provider requires that IPv6 be enabled.
Enable IPv6
Navigate to Setup > IPv6
- Set IPv6 to Enable.
- Select Native IPv6 from ISP in the dropdown.
- If you have specific IPv6 DNS servers you would like to add you can add them in the Static DNS fields or leave those fields blank.
- Click Apply Settings.
Power cycle your FlashRouter
Power your FlashRouter off and then power it back on by unplugging and then plugging it back in or using the button on the back of the FlashRouter.
Verify a successful IPv6 connection
Once the FlashRouter is finished powering back up, connect one of your devices to the FlashRouter via Ethernet or Wireless.
Visit http://ipv6-test.com/ where you should see Supported under IPv6 connectivity if your ISP supports IPv6 and your modem is setup to passthrough IPv6.
Please be aware that we can not replicate ISP specific IPv6 issues, which makes them challenging to troubleshoot. We recommend contacting your ISP as the first step of troubleshooting.
NordVPN Setup Guide for Privacy Hero
Your Privacy Hero NordVPN Router uses cloud-based management, which means you can securely access and adjust your router settings from anywhere, on any device with an internet connection. Whether you’re connected through your phone, another Wi-Fi network, or directly to the Privacy Hero network, setup and management are always within reach.
Follow the steps below to connect your Privacy Hero to NordVPN NordLynx or OpenVPN servers. By default, you’ll automatically connect to the fastest, most reliable server available based on your location. If you prefer, you can also select a specific country server and input it directly into your Privacy Hero for more control.
Don’t have a Privacy Hero yet? Get your Privacy Hero NordVPN Router here
1. From any device that has a browser such as a computer, smartphone, or tablet visit app.privacyhero.com
2. Enter your Privacy Hero account email and password. Click Login.
3. Click the VPN symbol.
4. Click the Change button and select NordVPN from the dropdown.
5. Click the Change button and select NordVPN from the dropdown and choose the NordLynx option. Next you will need to obtain your Token.
6. In a new tab login to your NordVPN account and select NordVPN from your list of Services.
7. At the bottom of the page click Get Access token and you will receive a code via email. Enter this code to proceed.
8. After you enter the email code select Generate new token and set it to Doesn’t expire. Copy this token.
9. Paste the token and then Click Save to connect to the server address recommended by NordVPN within your country.
10. To connect to a specific location, click the Country dropdown menu and scroll or type to search from the available options. Choose your preferred country and you will automatically connect to the recommended server within that country at the time. Then click Save.
11. If you prefer to enter a specific server address number click Advanced Options and then type in the NordVPN server you would like to use as shown below e.g. uk1784.nordvpn.com. Then click Save.
Use the NordVPN’s server recommendation tool to select a specific country and receive a recommendation for the fastest server based on your actual location. You can then enter that server in the Privacy Hero settings manually.
12. Your Privacy Hero settings should now show a Connected message, indicating you have successfully signed in to your NordVPN NordLynx VPN server!
1. From any device that has a browser such as a computer, smartphone, or tablet visit app.privacyhero.com
2. Enter your Privacy Hero account email and password. Click Login.
3. Click the VPN symbol.
4. Click the Change button and select NordVPN from the dropdown.
5. Choose the OpenVPN option to connect to OpenVPN servers or to setup a NordVPN Dedicated IP address. Next you will need to obtain your Manual Service credentials.
6. In a new tab login to your NordVPN account and select NordVPN from your list of Services.
7. At the bottom of the page in the Manual Setup section click Setup NordVPN manually then under the Configuration section go to Service credentials. Click Verify email to receive a code via email and enter the code to view and copy your credentials.
8. Enter these credentials into the OpenVPN Username and Password sections in your Privacy Hero and Click Save if you want to connect to the server address recommended by NordVPN within your country.
9. To connect to a specific location, click the Country dropdown menu and scroll or type to search from the available options. Choose your preferred country and you will automatically connect to the recommended server within that country at the time. Then click Save.
10. To connect with a NordVPN Dedicated IP Address or if you prefer to enter a specific server address number click Advanced Options and then type in the NordVPN server you would like to use as shown below e.g. uk1784.nordvpn.com. Then click Save.
Use the NordVPN’s server recommendation tool to select a specific country and receive a recommendation for the fastest server based on your actual location. You can then enter that server in the Privacy Hero settings manually.
11. Your Privacy Hero settings should now show a Connected message, indicating you have successfully signed in to your NordVPN Dedicated IP address or preferred OpenVPN server!
Privacy Hero’s cloud based router settings access makes it so you can change settings while not connected to the Privacy Hero network. Visit the NordVPN IP Check to verify your VPN IP address. If it has not changed be sure to double check that you are indeed connected to the Privacy Hero network.
Keep in mind that the VPN connection will not change the location of the streaming services listed in the Streaming Relocation area of the Privacy Hero settings if the Streaming Relocation feature is Enabled.
ExpressVPN Setup Guide for Privacy Hero
Your Privacy Hero router uses Cloud Based router management which means you can access the router settings from anywhere on any device that has an internet connection. You can follow these steps while connected to your phone, other Wi-Fi network, or the Privacy Hero network.
Use these steps to connect to ExpressVPN OpenVPN servers. First you will need to gather your unique OpenVPN login credentials and download the correct .ovpn file from the ExpressVPN website.
1. From any device that has a browser such as a computer, smartphone, or tablet visit app.privacyhero.com
2. Enter your Privacy Hero account email and password. Click Login.
3. Click the VPN symbol.
4. Click the Change button and select Custom from the dropdown.
5. In a new tab login to your ExpressVPN account.
6. Select Manual Configuartion on the from the menu options
7. Copy and paste the username and password from the blue boxes into the Custom box on your Privacy Hero settings page.
8. Download a server file from any of the available regions shown in the ExpressVPN Manual Configuration section (Americas, Europe, Asia Pacific, etc)
9. Drag and drop or click to Upload the server file into the Custom box on your Privacy Hero settings page and then you will need to add one line to the top of the configuration.
10. At the top of your OpenVPN configuration add in the following line as shown in the picture above
proto udp
Now click the Save button.
11. Your Privacy Hero settings should now show a Connected message, indicating you have successfully signed in to your ExpressVPN server.
12. Connect to the Privacy Hero via WiFi or ethernet connection on your device and visit an IP checker from a private/incognito browser to verify your new IP address and virtual location.
Privacy Hero’s cloud based router settings access makes it so you can change settings while not connected to the Privacy Hero network so if your IP Address has not changed be sure to double check that you are indeed connected to the Privacy Hero network on the device you are checking your IP from.
Keep in mind that the VPN connection will not change the location of the streaming services listed in the Streaming Relocation area of the Privacy Hero settings if the Streaming Relocation feature is Enabled.
PPPoE Internet Setup
Most ISPs do not require PPPoE credentials. If you are certain this is an ISP requirement in your setup, we kindly ask that you get in touch with your ISP to verify that they do in fact require PPPoE authentication and to provide you with the correct credentials to enter into your FlashRouter.
Before you enter your PPPoE credentials, you should have already setup your FlashRouter in a Single Router Setup with correct wiring. Once you enter PPPoE credentials you should then be able to connect to the internet.
If you are using a Dual Router Setup there is no need to enter PPPoE credentials if they are already entered in the existing router. You can disregard this article.
Enter your PPPoE credentials
DD-WRT Firmware
Navigate to Setup > Basic Setup
- Set the Connection Type dropdown to PPPoE.
- Enter your ISP assigned PPPoE username and password.
- Click Apply Settings.
Power cycle your network devices
- Power off your ISP modem and the FlashRouter.
- Power on the ISP modem and wait for it to fully boot up.
- Power on the FlashRouter.
Verify a successful Internet connection
Once the FlashRouter is booted up connect one of your devices to the FlashRouter via Ethernet or Wireless.
Visit any website and make sure the page fully loads. Once you have verified a successful Internet connection, begin connecting your network devices to the FlashRouter via wired or WiFi.
Please be aware that our support is not able to replicate PPPoE issues on our end, which makes them challenging to troubleshoot. In the event of an issue we recommend using a Dual Router Setup.
OpenWRT Setup Guide
Quick Start Guide for OpenWRT Routers
Find setup guides, FAQs and troubleshooting tips for the FlashRouters OpenWRT Routers.
Flint WiFi 6 AX1800 VPN Router
Internet Setup
WiFi Setup
VPN Setup
OpenWRT Features
Search Support Articles
Troubleshooting
More Ways to Get Help
Roqos Core Router Setup Guide
Quick Start Guide for Roqos Core Routers
Find setup guides, FAQs and troubleshooting tips for the FlashRouters Roqos Core Router.
Roqos Core Features
- Set a Static IP for your connected devices on Roqos
- VPN Kill Switch on Roqos
- Managing User Profiles on Roqos
- Cybersecurity and Intrusion Prevention on Roqos
- Block Websites by Country on Roqos
- Ad blocking on Roqos
- Parental Controls on Roqos
- Wireless Repeater – WiFi as WAN on Roqos
- What do the lights on my Roqos Core mean?
Search Support Articles
Troubleshooting
More Ways to Get Help
How do I reset and reconfigure my FlashRouter?
When is a router reset needed?
A reset of the FlashRouter should only be performed in the following instances:
- You have exhausted all other troubleshooting methods and cannot access your router settings.
- A backup file was saved of your previously working settings.
- Username and password to access the FlashRouter’s settings are not working.
- Power light on the router is blinking steadily.
- Firmware upgrade was performed with Reset to Default settings selected.
Reset Router
Asus FlashRouters:
- While the router is powered off press and hold the WPS button on the back or side of the router. Power up the router while continuing to hold the WPS. Continue to hold for 15 seconds as the router powers on (note this could be up to 45 seconds on some models before lights flash).
- You will see the lights on the router flashing steadily and this is how you know you have reset the router.
- Let the router sit for about a minute and then reboot the router.
Linksys and Netgear FlashRouters:
- While the router is plugged in, find the reset button located on the back of the router. You will need a pin or pencil to hold down the button for 15 seconds.
- You will see the lights on the back of the router flash simultaneously and this is how you know you have reset the router.
- Let the router sit for about a minute and then reboot the router.
Access Router Settings
1. Connect to the FlashRouter’s network via ethernet cable or wireless.
The wireless network will appear as “dd-wrt” and will likely not require a password to join. If it does require a password to join the password will be the default wireless password found on the bottom of the router.
2. Open your web browser and enter 192.168.1.1 in the URL.
3. Delete the dots and enter the new administration login in the Router Username, Router Password, and Re-enter to confirm fields.
TYPE CAREFULLY when setting the administration login as a typo will result in needing to reset the router again.
Change Local IP Address and DNS
Navigate to Setup > Basic Setup
1. Set the Local IP Address to 192.168.11.1
2. Set the Static DNS 1 to 8.8.8.8
3. Set the Static DNS 2 to 8.8.4.4
4. Set the Static DNS 3 to 208.67.220.220
CLICK SAVE
Setup WiFi
Navigate to Wireless > Basic Settings
Find your FlashRouter model in the WiFi Setup section and replicate the wireless settings on this page.
CLICK APPLY SETTINGS
REBOOT ROUTER
Connect to the FlashRouter's network
You will be able to connect to the newly setup wireless network using the details you set. The router will now be accessible at 192.168.11.1
Back up your settings
- Click the Backup button.
- A file named nvrambak.bin will be saved to your computer.
- You can load nvrambak.bin to restore your settings in the event of a reset.
SmartDNSProxy SmartDNS Setup
SmartDNSProxy offers a SmartDNS service for unblocking geo-restricted content without the encryption of a VPN service. SmartDNS routes DNS servers to different regions which “tricks” the website to allow access to previously restricted content.
SmartDNS does not change your IP Address or provide the encryption that a VPN connection does. This can result in faster speeds and unblocked content.
SmartDNS and VPN should not be configured at the same time. When using a SmartDNS connection, make sure to disable your VPN connection on the FlashRouter.
Register your IP Address
If you are not already a SmartDNSProxy user Sign Up Now.
Click on Sign Up and fill in the requested information.
Access the e-mail you entered and Verify your new account.
Your account will now be verified.
Login to SmartDNSProxy
Visit SmartDNSProxy’s DNS servers list and note the DNS servers of the location you would like to access content from.
Enter SmartDNSProxy SmartDNS servers on your FlashRouter
Navigate to Setup > Basic Setup
- Scroll down to Network Address Server Settings (DHCP).
- Enter in any combination of SmartDNSProxy SmartDNS servers you noted into Static DNS fields 1 and 2.
- Click Apply Settings at the bottom of the page.
- Reboot the FlashRouter.
Once the router is fully booted back up, you can access your desired regional content on any device that connects to the FlashRouter’s network.
Getflix SmartDNS Setup
Getflix offers a SmartDNS service for unblocking geo-restricted content without the encryption of a VPN service. SmartDNS routes DNS servers to different regions which “tricks” the website to allow access to previously restricted content.
SmartDNS does not change your IP Address or provide the encryption that a VPN connection does. This can result in faster speeds and unblocked content.
SmartDNS and VPN should not both be configured at the same time. When using a SmartDNS connection make sure to disable your VPN connection on the FlashRouter.
Login to Getflix
If you are not already a Getflix user Sign Up Now.
Login to Getflix’s website login page.
Visit Getflix’s DNS servers list page and note the DNS servers of the location you would like to access content from.
Enter Getflix SmartDNS servers on your FlashRouter
Navigate to Setup > Basic Setup
- Scroll down to Network Address Server Settings (DHCP).
- Enter in any combination of Getflix SmartDNS servers you noted into Static DNS fields 1 and 2.
- Click Apply Settings at the bottom of the page.
- Reboot the FlashRouter.
Register your IP Address
When the router is fully booted back up visit your Getflix user dashboard and make sure your IP Address is registered with Getflix. If it is not click Force IP Update.
Once you are successfully registered you can now access your desired regional content on any device that connects to the FlashRouter’s network.
CyberGhost Merlin OpenVPN Setup
Preparing for CyberGhost Setup
Obtain your CyberGhost OpenVPN information
If you are not already a CyberGhost user Sign Up Now.
1. Log in to your account on the CyberGhost website.
2. Select VPN.
3. Click Configure New Device.
4. Set Protocol to OpenVPN. Select the Country you would like to connect to. Select the Server Group. Name the device in the Device Name field. Click Save Configuration.
5. Press View configuration.
6. Copy the Username, and Password that appear to a notepad, since you will need this information later in the setup process. Click Download Configuration.
Open the folder that was downloaded. Then open the ca.crt the client.crt, and client.key files with NotePad++ for Windows or TextEdit for Apple. All CyberGhost servers have different keys and certificates.
Merlin Router Setup for CyberGhost
Login to Asus Merlin firmware settings in a browser on any computer or smart device connected to the Merlin FlashRouter’s network.
1. Navigate to the VPN tab.
2. Navigate to the VPN Client tab.
3. Click Choose file and select the .ovpn file from the folder you downloaded earlier. Then click Upload.
4. Set Automatic Start at boot time to Yes if you want the VPN connection to begin automatically when the router is powered off and back on.
5. In the Description field enter in the name you’d like to use for this OpenVPN Client profile. We typically advise entering in the location here. Our example server was in USA so I have entered in CyberGhost USA.
6. Set Accept DNS Configuration to Strict. Set Redirect Internet traffic through tunnel to Yes (all). Set Kill Switch to Yes or No depending on if you want the Internet to be killed if the VPN connection drops.
If you only want certain devices to connect to the OpenVPN Client profile you are setting up instead of all the devices connected to the FlashRouter’s network please set the Redirect Internet traffic through tunnel to VPN Director. Then complete the instructions on this page and then view our VPN Director guide.
7. Enter your CyberGhost OpenVPN username and password that you obtained earlier. Do not enter your account login.
8. Click the Edit button in the Keys and Certificates area.
9. In the Certificate Authority field paste in the entire content of the ca.crt file.
—– BEGIN xxx —– / —– END xxx —– block (including those two lines).
10. In the Client Certificate field paste in the entire content of the client.crt file.
—– BEGIN xxx —– / —– END xxx —– block (including those two lines).
11. In the Client Key field paste in the entire content of the client.key file.
—– BEGIN xxx —– / —– END xxx —– block (including those two lines).
12. Click Save at the bottom of that window.
13. Click Apply at the bottom of the page.
14. At the top of the page set the Service State toggle to ON to activate the VPN connection.
Verify a successful CyberGhost connection
- You should now see a CONNECTED message.
- Visit What is my IP Address from a private/incognito browser to verify your new IP address and virtual location.
How do I upgrade the Asus Merlin firmware of my FlashRouter?
Download the latest AsusWRT Merlin firmware build for your specific FlashRouter model at the Asus Merlin download website. Contact support@flashrouters.com if you are uncertain about your router model or your router model is not available. Click your router model and then select the Release folder.
Make sure you are following the directions below to load the firmware file into the router settings and not trying to open the firmware file on its own.
Access the FlashRouter via wired connection. It is possible to upgrade firmware via WiFi, but this is not recommended unless you are unable to wire directly to the router.
Navigate to Administration > Firmware Upgrade
What are some extra steps I can take to secure my network?
DD-WRT open source firmware removes many firmware vulnerabilities and backdoor access issues that may cause problems in stock firmware. DD-WRT is also updated more frequently than stock firmware, so be sure to always check with the FlashRouter support team to see which DD-WRT build we recommend for the highest level of security for your router at any time.
Aside from avoiding common issues and flaws with stock firmware, DD-WRT give you more control over the firmware settings and allows you to take some extra steps to really lock down your network security. In this article we highlight additional options for WiFi network security and also preventative measures for remote execution attacks.
Wireless MAC Filtering
Navigate to Wireless > MAC Filter
- Set Use Filter to Enable.
- Select either Prevent or Permit
- Choose Prevent to add MAC addresses that you don’t want to join your network.
- Choose Permit to add MAC addresses that you do want to join your network, automatically blocking all others.
- Select Edit MAC Filter List.
- Add the MAC Address of the wireless devices you want to prevent or permit. Be sure to use the xx:xx:xx:xx:xx:xx format. Hint: You can see a list of connected devices MAC Address by clicking Wireless Client MAC List.
- Click Save.
- Replicate the steps above for each wireless band.
- Click Apply Settings.
Disable Remote Access
Navigate to Services > Services
- Set SNMP to Disable – this setting disables Simple Network Management Protocol, which prevents software from polling your network for information about connected devices.
- Set SSHd to Disable – disabling the Secure Shell is a simple way to prevent root access and brute force attacks on your network.
- Set Telnet to Disable – Telnet is a less secure version of SSH to manage your local router network via command line.
- Click Apply Settings.
Navigate to Administration > Management
- Set Web GUI Management to Disable.
- Set SSH Management to Disable.
- Set Telnet Management to Disable.
- Set Allow Any Remote IP to Enable – Even though this setting is set to Enable there is no remote access because Web GUI Management is already set to Disable.
- Click Apply Settings.
Asus RT-AC68U B1 / C1 / AC1900 DD-WRT WiFi Settings
Recommended DD-WRT WiFi settings for the Asus RT-AC68U are based on extensive testing by FlashRouters. Please note that optimal settings may vary depending on external factors such as home size, interference, and the types of WiFi devices you are connecting in your network.
Screenshots below provide a visual display of recommended WiFi and encryption settings exactly as they appear in the Asus RT-AC68U with DD-WRT firmware.
Navigate to the Wireless > Basic Settings to view or edit WiFi network settings.
2.4 GHz - Wireless-N
5.0 GHz - Wireless-AC
Additional DD-WRT WiFi Information
Intimidated by all the available WiFi settings? The DD-WRT website provides extensive information about all of the available configuration options in the firmware. Learn about everything from Wireless channels to channel widths and more in the Basic Wireless Settings – DD-WRT Wiki.
RT-AC68U DD-WRT Wireless Security
The preset RT-AC68U FlashRouter WiFi password is Wireless#[First 5 characters of your router MAC]. The router MAC can be found on the bottom of your router. For e.g. if your MAC is 1459C07E70A8 then your WiFi password is Wireless#1459C
Navigate to the Wireless > Wireless Security to view or edit WiFi passwords.
